YOKOGAWA FX112 User Manual

10-2 IM 04L20A01-01E
Code Message Explanation/Countermeasures/Ref. section
87 This key is locked. Release the key lock. See section 9.2.
88 This function is locked. Release the key lock. See section 9.2.
89 Press [FUNC] key to login. Log in first. See section 9.3.
90 No permission to enter to the SETUP mode. Log in as a user who is allowed to enter basic
setting mode. See section 9.3.
91 Password is incorrect. Enter a correct password.
92 Press [ESC] key to change to the operation mode. Press the ESC key.
93 String including space or all space cannot be specified. Spaces are not allowed in the Web user name and
password.
94 More than one address cannot be specified. Multiple addresses cannot be specified. Only a
single sender is allowed.
100 IP address doesn’t belong to class A, B, or C. Check the settings. Confirm the settings with the
network administrator.
101 The result of the masked IP address is all 0s or 1s. Check the settings. Confirm the settings with the
network administrator.
102 SUBNET mask is incorrect. Check the settings. Confirm the settings with the
network administrator.
103 The net part of default gateway is not equal to that of IP address. Check the settings. Confirm the settings with the
network administrator.
104 FTP client failed because the memory mode is ‘manual’. Select auto save to transfer files via FTP.
See section 7.1.
•Execution Errors
Code Message Explanation/Countermeasures/Ref. section
150 This action is not possible because sampling is in progress. Stop data acquisition. See section 7.2.
151 This action is not possible during sampling or calculating. Stop data acquisition and/or computation.
See sections 7.2 and 8.2.
152 This action is not possible because saving is in progress. Wait till the saving ends.
153 This action is not possible because formatting is in progress. Wait till the formatting ends.
155 The message is not written while sampling is stopped. Start data acquisition first.
See sections 6.4 and 7.2.
160 Cannot load the specified data. Change the memory setting. Load display data when display data is set to be
acquired. Load event data when event data is set
to be acquired. See section 7.6.
165 Snapshot FTP transmission is not effective. Basic setting mode [#10 Communication] > [#3 FTP
transfer file].
Operation Errors
•Errors related to external storage medium
Code Message Explanation/Countermeasures/Ref. section
200 Operation aborted because an error was found on media. Check the storage medium.
201 Not enough free space on media. Use another storage medium.
202 Media is read-only. Release the write protection.
210 Media has not been inserted. Insert a storage medium into the drive.
211 Media is damaged or not formatted. Use another storage medium or carry out formatting.
212 Format error. Try formatting again or use another storage medium.
213 The file is read-only. Access to other files or make the file write-enable.
214 There is no file or directory. Check files and directories on the storage medium.
215 Exceeded the allowable number of files. Delete files or change storage medium.
216 The file or directory name is incorrect. AUX, CON, PRN, NUL, CLOCK, and strings
containing spaces are not allowable.
217 Unknown file type. Access to other files. See appendix 4.
10.1 A List of Messages

YOKOGAWA FX112 Specifications

General

Brand	YOKOGAWA
Model	FX112
Category	Controller
Language	English