10-3
IM 04L20A01-01E
Troubleshooting
10
Code Message Explanation/Countermeasures/Ref. section
218 Directory exists. Delete the directory or change directory name. Confirm the directory name. See section 7.7.
219 Invalid file or directory operation. A file with the same name exists. A directory with
files cannot be deleted. Delete files in the directory
first.
220 The file is already in use. Try again later. Wait till file is free.
230 There is no setting file. Access to other files.
Extension of setting files is .pnl.
231 Abnormal setting exists in file. Access to other files. Create a new setting file.
•Errors related to historical trend
Code Message Explanation/Countermeasures/Ref. section
232 There is no available data. This message may appear when recalling historical
trend. Access to other files.
233 The specified historical data do not exist. This message may appear when recalling historical
trend. See section 5.3.
234 The specified channel is not assigned to the display group. This message may appear when switching to trend
or bar graph from overview.
See section 5.2.
•Errors related to e-mail and Web server
Code Message Explanation/Countermeasures/Ref. section
260 IP address is not set or ethernet function is not available. The IP address is not specified. Check the IP
address.
261 SMTP server is not found. Occurs when the SMTP server is specified by
name.
• Check the DNS setting.
• Check the SMTP server name.
262 Cannot initiate E-mail transmission. • The host name of the FX100 is not correct. Check
the host name.
• The port number for SMTP server is not correct.
Check the port number.
263 Sender’s address rejected by the server. Check the sender’s address.
264 Some recipients’ addresses are invalid. Check the recipient’s address.
265 SMTP protocol error. May occur if a network failure (cable problems,
duplicate addresses, network device failure, and so
on) occurs in the middle of the e-mail transmission.
266 Ethernet cable is not connected. Check the cable connection.
267 Could not connect to SMTP server. • Check to see that the SMTP server is connected
to the network.
• If the SMTP server name is specified using an IP
address, check to see that the IP address is correct.
268 E-mail transmission request failed. Contact your nearest YOKOGAWA dealer.
269 E-mail transfer error. May occur if a network failure (cable problems,
duplicate addresses, network device failure, and so
on) occurs in the middle of the e-mail transmission.
275 The current image cannot be output to the Web. The setup screen cannot be output to the Web.
This message is displayed on the Web screen.
276 Image data currently being created. Unable to perform key operation.
Try again a little later.
This message is displayed on the Web screen.
277 Could not output screen to Web. Failed to create the image.
This message is displayed on the Web screen.
10.1 A List of Messages
To Next Page
Loading...
Need help?
General
