IM 12D07J01-10E-E
28
4.1.5. Regulatory standards (not applicable for sensors with suffix code -BV or -NV)
- ATEX : Directive 2014/34/EU
by applying:
EN 60079-0
EN 60079-11
EN 60079-26
Certificate no. : DEKRA 14ATEX0074 X
II 1 G Ex ia IIC T4… T6 Ga
- IECEx
Applying standards : IEC 60079-0
: IEC 60079-11
: IEC 60079-26
Certificate no. : IECEx DEK 14.0032X
Ex ia IIC T4…T6 Ga
Conformity : EAC (Eurasia)
TS (Taiwan)
- Electrical data for ATEX/IECEx : For sensor input circuit connected to
A certified intrinsically safe circuit with the following
maximum values:
Ui = 14.4 V; Ii = 116.5 mA; Pi = 0.342 W
or
Certified intrinsically safe Yokogawa Contact
Conductivity transmitter Model FLXA21 series or
Model SC202S series.
The effective internal capacitance Ci and the
effective internal inductance Li of the sensor depends only
upon the properties and length of the integral cable.
Special conditions (X) : T6 for Tamb. -30°C to 40°C
T5 for Tamb. -30°C to 95°C
T4 for Tamb. -30°C to 130°C
Impact on the product shall be avoided.
Electrostatic charges on the enclosure shall be avoided.
From the safety point of view the circuits shall be
assumed to be connected to earth.
Regulatory standards (all types)
CE : Decision 768/2008/EC
- Pressure : Directive 2014/68/EU
Applying article : 4.3 (Sound Engineering Practice)
- RoHS2 : Directive 2011/65/EU
Applying category : 9 (Industrial monitoring and control instruments).
To Next Page
Loading...
Need help?
General
