0: (Enabled (Depth-of-field preview button))
Press the camera’s depth-of-field preview button to fire the
modeling flash.
1: (Enabled (Test firing button))
Press the transmitter’s test flash button to fire the modeling flash.
2: / (Enabled (with both buttons))
Press the camera’s depth-of-field preview button or the
transmitter’s test flash button to fire the modeling flash.
3: OFF (Disabled)
Disables the modeling flash.
When the transmitter is not operated for 5 min., the power turns
off automatically to save energy. You can disable this function.
0: ON (Enabled)
1: OFF (Disabled)
You can set whether or not to cancel FEB automatically after
shooting three shots with FEB.
0: ON (Enabled)
1: OFF (Disabled)
You can change the order of the FEB sequence, 0: Standard
exposure, –:Decreased exposure (darker) and +: Increased
exposure (brighter).
0: 0 → → +
1: - → 0 → +
-
(Auto power off)
C.Fn-01:
C.Fn-02:
(Modeling flash)
C.Fn-03:
(FEB auto cancel)
(FEB sequence)
C.Fn-04:
C.Fn: Setting Custom Functions
26
To Next Page
Loading...
Need help?
General
