JOHNSON CONTROLS
117
SECTION 2 – OPTIVIEW CONTROL CENTER
FORM 160.79-O3
ISSUE DATE: 11/09/2018
2
This screen allows up to 10 Service Technician select-
ed parameters to be displayed. These parameters are
selected from a list on the Custom View Setup Screen.
This allows the Service Technician to display param-
eters pertinent to a particular problem during trouble-
shooting. At completion of the service call, the display
can be cleared or the parameters can be left there for
monitoring by operations personnel.
DISPLAY ONLY
None
PROGRAMMABLE
Print
Access Level Required: VIEW
This generates a listing of the parameters displayed on
this screen.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
History
Access Level Required: VIEW
Causes an instant return to the History Screen.
Setup
Access Level Required: SERVICE
Causes a jump to the subscreen that allows selection of
the parameters to be displayed.
CUSTOM VIEW SCREEN
FIGURE 46 - CUSTOM VIEW SCREEN
00324VIPC
To Next Page
Loading...
Need help?
General