Easy Installation
Several pieces of the Facility Explorer Commercial
Zoning Package can be ordered pre-assembled from
the factory to simplify installation:
• Zone Controller and Actuator Assembly (FXZAN)
• The FX05 Field Controller is combined with an
M9104AGA non-spring return actuator and an
electrical termination wiring block, all in one
packaged assembly
• Perfect for retrofit installations where the zone
damper is already installed
• Zone Controller, Actuator, and Damper Assembly
• FXZAN Zone Controller and Actuator Assembly is
combined with a round or rectangular zone damper
• Perfect for new installations or for retrofit
installations where the zone damper has not yet
been installed
COMMERCIAL ZONING PACKAGE
• Bypass Damper and Actuator Assembly
• A round or rectangular bypass damper is combined
with an M910xHGA non-spring return actuator
• FX16 Master Controller with Pre-Downloaded
Zoning Application
• FX16 Master Controller can be ordered with the
commercial zoning application pre-downloaded
• Once installed, the FX16 takes care of downloading
the corresponding parts of the zoning application to
each of the zone controllers
• Eliminates the downloading steps from the field
installation and startup
• This provides the possibility (with an onsite Medium
User Interface) to download, configure and
commission the entire system, including the
rooftop, bypass, and all zone controllers without
any software tool
© 2005 Johnson Controls, Inc. P.O. Box 423, Milwaukee, WI 53201 Printed in USA PUBL-3894
http://www.rezine.ne
Page 64
To Next Page
Loading...
