67
KorDSS software installation
NOTE: YSI recommends that you have administrative privileges on the PC in which KorDSS will be
installed.
Follow these steps to complete the KorDSS installation process:
1. Install the KorDSS software from the USB flash drive included with the instrument.
2. Install the ProDSS instrument driver.
3. Start KorDSS for the first time and complete the KorDSS Startup Wizard.
System requirements
Supported 32 bit (x86) Microsoft Operating Systems:
• Microsoft Windows XP Home SP3
• Microsoft Windows XP Professional SP3
• Microsoft Windows 7 Home Basic SP1
• Microsoft Windows 7 Home Premium SP1
• Microsoft Windows 7 Professional SP1
• Microsoft Windows 7 Enterprise SP1
• Microsoft Windows 7 Ultimate SP1
• Microsoft Windows 8/8.1
• Microsoft Windows 8/8.1 Professional
• Microsoft Windows 8/8.1 Enterprise
Supported 64 bit (x64) Microsoft Operating Systems:
• Microsoft Windows 7 Home Basic SP1
• Microsoft Windows 7 Home Premium SP1
• Microsoft Windows 7 Professional SP1
• Microsoft Windows 7 Enterprise SP1
• Microsoft Windows 7 Ultimate SP1
• Microsoft Windows 8/8.1
• Microsoft Windows 8/8.1 Professional
• Microsoft Windows 8/8.1 Enterprise
Ram Memory Requirement:
• Minimum of 2 GB of RAM installed
Hard Disk Free Space:
• Minimum of 500 MB of free hard drive space
Internet Access Required to Support:
• Software and device updates, software licensing, and maps
To Next Page
Loading...
