Cleaning the Front Wheel
14
● eX500 care & maintenance
Cleaning the Main Brush
4. Separate the brush cover then remove the main brush.
Furrow
CLICK
CLICK
6. Aer cleaning, put the
pyramid-shaped bump on the side
of the main brush to the
pyramid-shaped recess on the boom
of the robot.(Insert rmly to ensure
there is No gap between the brush
and the cam.)
4. Put the front wheel back and lock in place with the clip.
1. Press the front-wheel x clip with both hands and li up to seperate.
2. Remove foreign substances on the front wheel using the cleaning brush.
5. Clean hair, carpet ber and other substances may get stuck on the main
brush using the cleaning brush. Over time, hairs and bers accumulate
between the main brush and the bearing. is extra friction which will causes
less ecient cleaning, more baery strain leading to shorter running time and
may ultimately stop eX500.
※ Use scissors or a knife along the main brush furrow to remove the hair.
2. Turn eX500 over and
place the boom facing
upside.
2. Unlock the le/right-xed
clip of the main brush.
To Next Page
Loading...
Need help?
General
