GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
YX Technical department ~ 13 ~
5 Guider
Guider will be described in this paragraph. The most frequently modified parameters and most of
the individual parameters are listed in this page.
WAN port is to connect to switch or route then you can use PC that on the same LAN network to
login. There’s three types of wan connect.
Static IP: You can set WAN IP,IP Mask, Default Gateway and DNS Server of WAN port to
connect the Internet.
Dynamic IP: You can get IP address ,IP Mask ,Default Gateway and DNS Server dynamically from
your DHCP server.
PPPoE: In this mode,you can use MOIP device to dail-up network. You can set User Name and
Password which you get from your ISP. And you also can set MTU and Service Name.
To Next Page
Loading...
