YX MOIP Series - USSD;SMS Query and Tariff Settings; USSD;SMS Query Keyword List; Tariff List

GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
YX Technical department ~ 28 ~
7.7.3 USSD/SMS Query Keyword List
Fields are specified as following:
 Provider ID: Carrier code, different operators can be set separately.
 Query Command: Specify the query command(If you do not know, please consult your
operator)
 Balance Keywords: Please fill in the USSD or SMS sent query command, in the message
returned by the operator, the front character of the balance value, As shown:
The balance read will be displayed in the Call status, After setting, you need to save and
reboot to take effect.
 Invalid Balance Keywords: If the device recognizes this keywords from USSD/SMS, it will
lock the SIM card and prompt no balance.
 Invalid SIM keywords: If the device recognizes this keywords from USSD/SMS, it will lock the
SIM card and prompt blocked by operator
7.7.4 Tariff List
The screenshot below shows the operation mode to set billing tariff.