YX MOIP Series - Rules Setting; Prefix Rules

GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
YX Technical department ~ 25 ~
Get IMEI From Server: Get IMEI from server, needs to be used with SIM Server and set on SIM
Server
7.6 Rules Setting
7.6.1 Prefix
The screenshot below shows the operation mode to set manipulation for dial prefix.
Fields are specified as following:
 Prefix: The original prefix in phone number.
 Manipulated Prefix: Specify the digits with which the value specified by Prefix will be
substituted.
GSM-->IP
Take the value in screenshot as an example, the prefix 0086 in dialed number will be substituted
with 0. That’s to say, if 00867522777557 is input to dial, the final number dialed out is
07522777557.
Note: the manipulation is executed after pattern is matched.
IP-->GSM
 Callee Prefix: Specify the callee prefix.
 Digits Stripped: Specify the digits which are stripped.
 Digits Added: Specify the digits which are added.