Contents [ hide
1 Safety Introduction
2 Product Parts
2.1 Robot anatomy
2.2 Changing dock
2.3 Remote Control
2.4 CLEAN button status
2.5 Remote control operating
3 Product Operating
3.1 Starting up/Pause/Sleeping How to get
started
3.2 Starting up/Pause/Sleeping
3.3 Scheduling
3.4 Cleaning mode
4 Product Maintaining
4.1 Cleaning side brushes
4.2 Cleaning dustbin and filter
4.3 Cleaning cliff sensors and auto charging
pins
4.4 Front-wheel cleanup
5 Trouble Shooting
5.1 Error code sheet
5.2 Erouble Shooting
6 Product Specifications
7 File Downloads
8 Related Manuals
Safety Introduction
Before using this product, please read the following safety instructions and follow all normal safety
precautions.
Before using this product, ensure the power switch is ON.
If the product is not used for long time, please turn off the switch on the right side of the main body.
WARNING
1. Only the certified technician may disassemble the product. Users are not allowed to disassemble or repair the
product.
2. Only use the adapter provided by the factory. Using another un-matched adapter may cause electric shock, fire
or product damage.
3. Do not touch the power cord, plug, or adapter when your hands are wet.
4. Do not make clothes or parts of a body drawn into the product’s wheels.
5. Do not take this product close to cigarette, lighter, match or any flammables.
6. If the product is needed to dean, dean it after charging is stopped.
7. Do not over-bend the power cord or pressure the power cord with heavy or sharp
8. This product is used only indoors, do not use it outdoors.
9. Do not sit on top of this product or attach an object on the top of it.
10. Do not use this product in wet or moist environment (any environment with liquid)
11. Before use, collect the floor environment (remove al the fragile objects and cords, things papers and drapes
To Next Page
Loading...
