Need help?Do you have a question about the zarges PaxTower S-PLUS 1T and is the answer not in the manual?
General| Material | Aluminum |
|---|---|
| Type | Mobile Scaffold Tower |
| Model | PaxTower S-PLUS 1T |
| Standards | EN 1004 |
| Platform Size | 0.70 m x 1.50 m |
Overview of the manual's scope and applicability to scaffold towers and its target audience.
Details certification of scaffold towers by TÜV Süd and GS safety mark.
Defines the warranty period, scope, and conditions for manufacturer liability.
Specifies the publication date of the English version of the assembly and use instructions.
Outlines manufacturer's copyright and reserved rights for the documentation.
Defines the correct and intended application of scaffold towers as per EN 1004.
Identifies usage patterns and actions classified as improper or misuse of the scaffold.
Critical safety precautions to be followed during scaffold tower assembly and setup.
Essential guidelines for the safe and correct operation and movement of the scaffold tower.
Precautions for working near or on electrical units while using the scaffold tower.
Highlights relevant safety regulations and information sources like DGUV and BGV.
Provides key technical data including weight, working height, scaffold height, and platform height.
Step-by-step guide for setting up the folding frame unit and securing its locking mechanism.
Instructions for assembling a Size 1 scaffold tower, including platform and toeboard installation.
Detailed steps for assembling a Size 2 scaffold tower with frames, guardrails, and toeboards.
Guide for assembling larger towers (sizes 3 & 5), emphasizing two-person assembly.
Instructions for assembling sizes 4 & 6 towers, covering extensions, guardrails, and toeboards.
Procedures for safely dismantling the scaffold tower in the reverse order of assembly.
Detailed process for fitting castor adapters to compensate for uneven ground.
Illustrates key dimensions and measurements of the scaffold tower.
Explanation of labels, pictograms, and conformity marks on the scaffold tower.
Lists order numbers, package contents, and ballasting needs for various tower sizes.
Visual representations of the physical structure for different scaffold tower sizes.
A detailed diagram with numbered components for understanding the complete assembly.
Explains the function of stabilisers and the need for ballast weights for tower stability.
Provides instructions on the correct placement and quantity of ballast weights.
Instructions for cleaning, lubrication, storage, and environmental disposal of cleaning agents.
Procedures for inspecting components like frames, braces, platforms, and castors for defects.
To Next Page
