Zaxcom Nomad - Nomad Hardware and Software Specs

Zaxcom Nomad User’s Manual Specifications
86
Nomad Specifications
Hardware
Analog Inputs
Channel Count
Mic / Line 6
Line only 4 (camera return or line level inputs)
Connector
Mic / Line XLR-3F
Line only TA-5F
Input Range
Mic-level –56 dBu to –26 dBu
Line-level –10 dBu to +8 dBu
Phantom Power 48 VDC, 40 mA total combined (mic input only)
Impedance
Mic-Level 1.0 k ohms
Line-Level 10 k ohms
ADC Bit-depth 24
ADC Dynamic Range
W/O Compressor 135 dB
With Compressor 115 dB
Clipping Level +28 dBu
Frequency Response 50 Hz to 22 kHz (48 kHz sampling-rate)
THD + Noise 0.0015%
Ext Slate Mic
Connector 1/8” (3.5mm) stereo jack
Input Range –56 dBu to –26 dBu
Digital Inputs (not available in Nomad-Lite)
Channel Count 8 (4 x AES-3 pair, 1 x AES-42 pair)
Connector 1 x mini DB-15 (DE-15) shared w/digital outputs
Sample-rate Converters 4 pairs
Analog Outputs
Channel Count 4 x balanced XLR-3M
6 x balanced (3 x TA-5M)
Tape/Mono 2 x unbalanced 1/8” (3.5 mm) stereo
Output Level 0 dBu, -10dBu, -35dBu at –20 dBFS
Clipping Level +20 dBu
DAC Bit-depth 24
DAC Dynamic Range 115 dB
Impedance 30 ohms
Source Mix/Direct (selectable)
Digital Outputs (not available in Nomad-4)
Channel Count 6 (3 AES pairs)
Connector 1 x mini DB-15 (DE-15) shared w/digital inputs
Source Mix/Direct (selectable)
Headphones
Connector #1 1/4" stereo jack
Connector #2 1/8” (3.5mm) stereo jack
Dynamic Range 115 dB
Impedance 100 ohms (optimal)