ZBL Science & Technology ZBL-R800 User Manual

Operation manual of ZBL-R800, ZBL-R630, ZBL-C310A
Hotline: (86)010-51290405 Fax: (86)010-51290406
45
enter into data display interface as shown in figure3-31. The left side
is list section of objects based on reverse stored order, that is, the last
stored object is displayed first. The right side is data display section, it
can display statistics of stored data of current object, the raw
measurement data or graphics.
Pressing【MENU】key in this interface, it can return to main menu
interface.
Figure 3-31 Data display interface
Pressing 【a】 or【b】 on interface in figure3-31, you can move
cursor to the desired check object. Right side will display
corresponding statistics of this object.
Pressing【ENTER】to enter into data check state, displaying stored
tested data of selected object.
3.4.4.1. Data check of General-scan
Figure3-32 General-scan data
If the object is tested by general-scan, the data display interface shown
in figure 3-32, displaying default diameter, amount of stored data,

ZBL Science & Technology ZBL-R800 Specifications

General

Brand	ZBL Science & Technology
Model	ZBL-R800
Category	Security Sensors
Language	English