41
Operations
Prepare the Media for Loading
3/12/09 Xi4 User Guide P1009874-001
Fanfold Media
You can store fanfold media behind the printer (rear feed) or under the printer (bottom feed).
Using the media supply hanger is optional.
To load fanfold media, complete these steps:
1. Raise the media door.
2. Thread the fanfold media through the rear access slot (1) or the bottom access slot (2).
If using... Then use this access slot...
Rear feed
(shown using the media
supply hanger)
Bottom feed
(shown without using
the media supply
hanger)
To Next Page
Loading...