Zebra CS6080 Series - Troubleshooting Specific Issues; Scanner Charging Issues; Bluetooth LED Issues; Scanner Memory Issues

Quick Start Guide 23
Scanner does not fully
charge.
Ensure the scanner is
properly seated in the
cradle or properly placed on
a Qi wireless charging pad.
Bluetooth LED turns
off.
Scanner is out of range;
move closer to the host and
press any button to re-pair
with the host.
Scanner emits long
beeps for 5 seconds
when scanning a
barcode.
Memory is full; download
barcode data to the host
and clear the memory.
Problem Possible Solutions