Zebra S4M

Operations
Adjust Printhead Pressure
62
13290L-004 Rev. A S4M User Guide 6/15/09
2. If necessary, adjust the pressure adjustment dials as follows:
If the media... Then...
Requires higher pressure to
print well
Increase both dials one position.
Shifts left while printing Increase the outside dial setting one position, or
decrease the inside dial setting one position.
Shifts right while printing Increase the inside dial setting one position, or
decrease the outside dial setting one position.
Prints too lightly on the left side
of the label.
Increase the inside dial setting one position.
Prints too lightly on the right
side of the label.
Increase the outside dial setting one position.