Peel/Rewind Upgrade
Remove the Electronics Cover
4
79835L-001 B ZM400/ZM600 Installation Instruction 7/30/07
5. See Figure 3. Remove the four mounting screws on the rear of the printer.
Figure 3 • Remove the Electronics Cover Mounting Screws
6. See Figure 4. Remove the electronics cover by pressing in on the electronics cover with
the palm of your hand, and then lifting up on the cover.
Figure 4 • Remove the Electronics Cover
1
Electronics cover
2
Mounting screws (4)
2
1
To Next Page
Loading...
