What to do if Zeiss Microscope detects several foot control panels during pairing?
If pairing cannot be performed successfully and several foot control panels were detected, it may be because multiple foot control panels are nearby. Restart the pairing process.
General| Brand | Zeiss |
|---|---|
| Model | opmi lumera 700 |
| Category | Microscope |
| Language | English |
Explains hazard symbols, information symbols, and their meanings for safe operation.
Details prerequisites for using the device safely before, during, and after operation.
Describes measures to prevent eye damage from light exposure during procedures.
Identifies and explains various labels and symbols found on the microscope and suspension system.
Details the various parts and features of the surgical microscope unit.
Explains the components and function of the XY coupling mechanism.
Describes the parts and functions of the floor stand supporting the microscope.
Details the design, controls, and storage of the foot control panel.
Guides on replacing components, connecting accessories, and balancing the system.
Instructions for connecting the system to power and accessories.
Procedures for relocating, positioning, and aligning the system in the OR.
Steps for preparing the device for sterile use, including asepsis caps and drapes.
Procedures for powering the system on/off and performing a function test.
Guides for system-specific and user-specific settings and configurations.
Details on using the 5.7" control panel, symbols, and configuring the foot control panel.
Instructions for configuring light sources, illumination modes, and accessories.
Provides a general overview of the typical steps during a surgical procedure.
Guidance on handling failures in main functions like XY, focus, zoom, and light.
Lists common system problems, their causes, remedies, and related pages.
Details error messages displayed on the control panel and their corresponding remedies.
Outlines regular preventive maintenance activities and their recommended intervals.
Instructions for cleaning optical and mechanical surfaces, and sterilization procedures.
Step-by-step guides for changing halogen and xenon lamps.
Procedures for readjusting the monitor support arm for proper positioning.
Provides detailed optical, electrical, and mechanical data for the system.
Lists compatible system devices and ordering information for accessories.
Details system approvals, requirements, and operating ambient conditions.
Information on the optional video recording function via USB port.
Guides on storage options, password protection, and managing patient data.
Explains button functions on the control panel and menu functions on the video monitor.
Details network interface setup and device configuration for networking.
Checklist for pre-use verification and procedures for recording photos and videos.
Instructions for importing and exporting images, videos, and patient data.
Definitions of technical terms used in the manual.
An alphabetical list of abbreviations and their explanations.
Index entries for numerical terms and references.
Index entries starting with letters A and B.
Index entries starting with letters C through F.
Index entries starting with letters S through X.
To Next Page
