Zenith Data Systems Z-100 Series - Tables

Page V
Contents
Figures
2.1 Z-150 Disassembly 2.1
2.2 Z-160 Chassis 2.2
2.3 Z-160 Disassembly 2.4
2.4 Z-329 Card Component Layout 2.5
2.5 Z-150 Chassis 2.7
2.6 CPU Card Switch Setting 2.8
2.7 Blank Bracket 2.9
2.8 Z-160 Chassis 2.10
2.9 Z-160 Reassembly 2.11
2.10 Z-150 Reassembly 2.13
2.11 IBM PC Cover Removal 2.14
2.12 Z-329 Component Layout 2.15
2.13
IBM System Board Component Layout 2.17
2.14
IBM PC Cabinet 2.18
2.15 Blank Bracket 2.18
2.16
IBM PC Cover Installation 2.19
3.1 Character Generation 3.3
3.2 Interlace/Non-Interlace Modes 3.8
5.1 Z-329 Card Block Diagram 5.1
5.2 6845 Pinout 5.9
Tables
3.1 Character/Attribute Addressing 3.2
3.2 Interlace Mode Register 3.9
3.3 Character Skew (Delay) Control 3.9
3.4 Cursor Skew (Delay) Control 3.9
3.5 Cursor Start Register 3.10
4.1 Video Control Register Functions 4.1
4.2 Character/Attribute Addressing 4.3
4.3 Attribute Codes 4.4
4.4 Character Font 4.8
4.5 Register Addresses 4.9
4.6 CRTC Registers and Default Values 4.10
5.1 Transceiver States 5.5
5.2 Decoder U28 Truth Table 5.6
5.3 6845 Pin Functions 5.10