When first using the TV/VCR, you may want to select
language (English or Espafiol=Spanish) and preset the
tuner to show only the channels you receive in your area.
You must use the remote control for the following
steps.
NOTE: Channel memory programming is not needed
when using a converter/de-scrambler box.
1 Plug the TV/VCR power cord ;-_
into a standard AC outlet.
2 Turn on the TVNCR
I I U J II II I l I I i lJ J Jll £N I[ I I J] J [
3 Select "ENGLISH" or "ESPAI_iOL"
Select by using the CH • or • f -sET0p-
L
LANGUAGE
button. "[ ]" indicate the selected _NG_,SH)_S,A_O_
language. AUtOP.ESEr
4 Begin auto preset -SETUP-
LANGUAGE
Press MENU button to move to t_NGE,SN_EsPA_OL
"AUTO PRESET" and press ..........
SELECT button.
The tuner scans and memorizes
all the active channels in your area.
NOTES:
• The TV/VCR distinguishes between standard TV
channels and CATV automatically.
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".
5 After scanning
The tuner stops at the lowest memorized channel.
(TV mode: from CH 02/CATV mode: from CH 01)
Should you want to recall the selected channels, you can
select the desired channel by using the remote control
number buttons or CH • or V.
TO RETURN TO TV MODE WHEN
SCANNING
Press MENU button in scanning mode.
Channels that you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channels to the memory again.)
1 Select "CHANNEL SET UP"
Press MENU button to move to _M_RR.0_.A_,NG
PICTURE CONTROL
"CHANNEL SET UP" and press s.........CHANNEL SET UP
USER'S SET UP
LANGUAGE ENGLISH]
SELECT button. CART,O.co_
TIME SEARCH
2 Select "ADDfDELETE CH"
Press MENU button to move to
"ADD/DELETE CH" and press
SELECT button.
II_ - CHANNEL SET UP -
"W/CA'rV [ TV ]
AUTO PRESET
ADD / OELETE CH
3 Enter the desired channel number
Press CH • or • button until the ,SO_ET_C. "_
desired channel number appears. 0_ c_ )
J
You can also use the number but-
tons to enter it.
4 Delete (or add) it from (into) memory
Press ADD/DELETE button. The channel number
changes to light red. The channel is deleted from
memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the ADD/DELETE button again, the
channel is added to memory again.
l dded channel : Light blue.
Deleted channel : Light red.
L
5 Exit the channel setup mode
Press MENU button to return to TV mode.
NOTE: If you wish to confirm that channel(s) has been
deleted or added, press CH • or • button.
-12-
EN
6DI 1
To Next Page
Loading...
