. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select the AV 1 input source on the TV using the INPUT
button on the remote control.
If connected to AV IN2, select AV 2 input source.
Refer to the DVD player's manual for operating instructions.
Connect the S-VIDEO output of the DVD to the
S -VIDEO input on the TV.
Connect the audio outputs of the DVD to the AUDIO
input jacks on the TV.
. How to connect
2. How to use
Select the HDMI1 or HDMI2 input source on the TV using
the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1 or HDMI IN 2 jack on the TV.
No separated audio connection is necessary.
HDMI supports both audio and video.
HDMI-DVD OUTPUT
Zenith.book Page 20 Wednesday, April 2, 2008 11:46 AM
To Next Page
Loading...
