Program Mode JesterML Operating Manual
73-406-00 Issue 2.0 15 of 73
press the button again, and the LED will go out. To save changes to a new location, first select that
location using:
• Memory: cursor buttons
• Submaster: Flash buttons, or PAGE B then Multi-Function-Keys
• Palette: COLOUR, BEAMSHAPE or POSITION then Multi-Function-Keys
then press PROGRAM/GO to store to the new location. Again the LED will go out as the desk is no
longer in edit mode. This provides a Copy function.
The EDIT button also works in RUN Mode, so that quick edits can be made to the selected
memory/submaster, with the desk returning automatically to RUN Mode once the edit is complete.
To Next Page
Loading...