JesterML Operating Manual Setup Mode
50 of 73 73-406-00 Issue 2.0
Test Mode
This option is provided primarily for factory and dealer servicing only. It allows the
hardware of the JesterML to be tested in isolation from setup options or programming
in the show data, which can be useful in diagnosing some problems.
• Pressing a button will display it’s name on the Main LCD, optionally toggle nearby
LEDs, and optionally display the level of a nearby fader.
• The 7-segment displays will show a count pattern
• Wheel levels will be displayed on the wheel LCD.
• The DMX Input and Output ports will be tested (this test may fail if a DMX-Input
source is present).
• Shaded colour bar patterns are displayed on the monitor output.
• MIDI test messages are transmitted if MIDI is enabled.
Press ENTER to leave test mode and return to the Setup menu.
To Next Page
Loading...
Need help?
General
