EasyManuals Logo

Zero FX User Manual

Zero FX
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Troubleshooting
6.13
NUMBER OF RED FLASHES CAUSE SOLUTION
1
Motor Stop Switch Disabled or Kickstand
Switch Disabled
Motor stop switch is in the OFF position. Press the
motor stop switch ON button. Kickstand is down.
Raise kickstand.
2 Indicator Always ON Contact Zero or your dealer.
3 Self-Test Failed Unplug charger.
4 Charger Connected
Throttle is ON or throttle/connection is bad. Verify
throttle action and/or check connection.
5 High Throttle Disable
Could not pre-charge motor controller. Contact your
dealer.
6 Low Power Pack Disable Charge Power Pack Before Riding.
7 Contactor Error Contact Zero or your dealer.
8 Controller Area Network (CAN) Error Contact Zero or your dealer.
9
Battery Management System (BMS)
Throttle Disable
Contact Zero or your dealer.
10 Throttle Out of Range
Bad throttle or connections. Verify throttle
action and/or check connection.
Zero Owner's Manual (X, MX and XU).book Page 13 Monday, April 29, 2013 3:30 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zero FX and is the answer not in the manual?

Zero FX Specifications

General IconGeneral
CategoryElectric Motorcycle
Max Battery Capacity7.2 kWh
Top Speed85 mph (137 km/h)
Max Power46 hp (34 kW)
Peak Torque78 ft-lb (106 Nm)
BatteryZ-Force Li-Ion
Front SuspensionShowa 41 mm inverted cartridge fork
Rear SuspensionShowa piggyback reservoir shock
Front BrakeSingle 320 mm disc with J-Juan 2-piston caliper
Rear BrakeSingle 240 mm disc with J-Juan 1-piston caliper
MotorZ-ForceĀ® 75-5 passively air-cooled, high efficiency, radial flux, interior permanent magnet, brushless motor

Related product manuals