Troubleshooting
6.14
11 Motor Temperature Sensor Out of Range
Bad motor temperature sensor or connections.
Replace temperature sensor and/or check
connections.
12 MBB Voltage Error Contact Zero or your dealer.
13 Board Temperature Warning
Board may have overheated. Let the motorcycle cool
down.
14 Current Sensor Error
Problem with current sensor or
connection. Contact your dealer.
15 Board Temperature Sensor Out of Range
Problem sensing temperature of board. Contact your
dealer.
16 High Current Disable
Turn the ignition OFF and ON. If problem persists
contact Zero or your dealer.
17 Temperature Protection Error
Turn the ignition OFF and allow to cool off and then
restart. If problem persists contact Zero or your
dealer.
18 Throttle Output Error
Turn the ignition OFF and ON. If problem persists
contact Zero or your dealer.
19 Kickstand Error
Bad kickstand switch or connection. Replace
kickstand switch and/or check connection.
20 Miscellaneous Error Contact Zero or your dealer.
NUMBER OF RED FLASHES CAUSE SOLUTION
Zero Owner's Manual (X, MX and XU).book Page 14 Monday, April 29, 2013 3:30 PM
To Next Page
Loading...
