Display - resetting dat
Display - manual brake
Display - error messages
Resetting data marked with an arrow can be done on
a display (4) and (5). Select display (4) or (5) with a button
(A) and by a longer pressing of button (B) reset data
marked with an arrow.
FHD14N059
If the tractor is not braked by a manual brake, a warning is
displayed on a display (letter P in a circle) and at the same
time a sound signal is heard. See the chapter 'Driving
operation' for more.
Brake the tractor by a manual brake.
FH12N039
Serious faults in the system (1)
STOP sign, number of fault (1) is displayed on a display
with serious faults.
If this situation occurs, set the tractor aside and
contact service.
Less serious faults in the system (2) a (3)
With less serious faults in the system, the number of faults
(2) are displayed on the display for a time period of
approximately 5 seconds.
Then the display of fault is minimized to the main field. (3)
If this situation occurs, complete the work and
contact service.
See more in the chapter of 'Driving operation'.
FHD14N002
ACQUAINTANCE WITH THE TRACTOR
To Next Page
Loading...
