Engine heatin
FH11N091
Do further heating of the engine during the drive. The heating of the engine by lengthy idle run
or sharp increase in revolutions is harmful to the engine. If the temperature of coolant has not
reached 45°C, do not exceed the engine revolutions over 2000 rpm.
Gear shifting
Reversing lever
The tractors are equipped with a five-gear synchronized
gearbox, three-gear torque multiplier, reversing and two-
gear reduction.
Five-gear gearbox is shifted by main shifting lever with
buttons for disengaging the travel clutch (1) and for
shifting the individual gears of multiplier (2).
FH12N037
The selection of the direction of travel drive is done by
reversing lever (forward, backward).
F - driving forward
N - neutral
R - driving backward
The lever also serves for starting the tractor without the
depressed clutch pedal.
X212a
To Next Page
Loading...
