127
ELECTRO-HYDRAULIC SYSTEM
F_02_170 F_02_171
LOWERING SPEED
The lowering speed of the three-point
hitch is set with the control (3).
Symbol of the maximum
lowering speed
Symbol of the minimum
lowering speed
In the vibration dampening mode
and during the use of the rear
control buttons the lowering
speed setting is out of function.
FREE POSITION
For permanent work with free hydraulic
system, e.g. during work with a plough
with a support wheel the position of the
control (4) under the indication (A) and
the position of the control (6) at the posi-
tional control symbol is used.
To Next Page
Loading...
Need help?
General