25
DAILY PREVENTIVE MAINTENANCE
E14 E15 G16
SUSPENSION EQUIPMENT
Check condition of suspension and con-
nection equipment including the trailer.
AFTER WORK WITH FRONT-CARRIED
MACHINESI
After work with front-carried machines:
− Check tightness of connections of the
external hydraulic circuit for control of the
front three-point suspension.
Clogging of radiators:
1. Tilt up the bonnet.
2. Release and slide out the A/C con-
denser to the left side of the tractor.
3. Clean the front walls of the engine ra-
diator (A/C condenser) using com-
pressed air (blow air in direction from
the engine).
4. Remove remaining dirt from the
space under the bonnet (to prevent its
re-sucking).
SHORT FUNCTIONAL TEST
After starting the engine check whether
the indicator of hydrostatic steering fault,
indicator of engine lubrication and indica-
tor of recharging are off.
Check function and tightness of hydrau-
lic steering circuits.
To Next Page
Loading...
Need help?
General