Zhiyun CRANE 2S

22
Using the CRANE 2S
Go mode (GO):
Press the M button thrice
The roll axis motor is locked, and the tilt axis and pan axis motors quickly follow the
rotation of the handle.
横滚轴
俯仰轴
航向轴
Following mode (F):
Press or press and hold the trigger button
The roll axis motor is locked, and the tilt axis and pan axis motors follow the rotation
of the handle. Push the joystick up/down to change the roll angle.
横滚轴
俯仰轴
航向轴
tilt axis
Roll axis
Pan axis
tilt axis
Roll axis
Pan axis