9.2 EC Declaration of Incorporation - Translation -
(english)
ZA87-GB 1836 Index 008
as defined by the EC Machinery Directive 2006/42/EC,
Annex II B
The design of the incomplete machine:
Axial fan FA.., FB.., FC.., FE.., FF.., FG.., FS.., FT.., FH.., FL.., FN.., FV.., DN.., VR.., VN.., ZC.., ZF..,
ZG.., ZN..Centrifugal fan RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ.., GR.., ER..,
WR..Cross-flow fan QK.., QR.., QT.., QD.., QG..
Motor type:
Asynchronous internal or external rotor motor (also with integrated frequency inverter)Electronically
commutated internal or external rotor motor (also with integrated EC controller)
complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in EG Machinery
Directive 2006/42/EG.
The manufacturer is
ZIEHL-ABEGG SE
Heinz-Ziehl-Strasse
D-74653 Künzelsau
The following harmonised standards have been used:
EN 60204-1:2006+A1:2009+AC:2010 Safety of machinery; electrical equipment of machines; Part
1: General requirements
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk
assessment and risk reduction
EN ISO 13857:2008 Safety of machinery; safety distances to prevent danger
zones being reached by the upper limbs
Note: The maintenance of the EN ISO 13857:2008 relates only to
the installed accidental contact protection, provided that it is
part of the scope of delivery.
The specific technical documentation in accordance with Appendix VII B has been written and is
available in its entirety.
The person authorised for compiling the specific technical documentation is: Dr. W. Angelis, address
see above.
The specific documentation will be transmitted to the official authorities on justified request. The
transmission can be electronic, on data carriers or on paper. All industrial property rights remain with
the above-mentioned manufacturer.
Quick Start Guide ECblue BASIC-MODBUS, ECblue BASIC Enclosure
L-BAL-F078-GB 2024 Index 005 Part.-No. 00706648-GB
30/32
To Next Page
Loading...
