Zippie Salsa - Page 34

34 ZIPPIE SALSA & SALSA M
4. Remove the 4mm back-post adjustment bolts
(Fig. 6.21).
5. Move both back-posts to the desired height
(Fig. 6.22)
7. Replace the backpost adjustment screws. Use 10 N/m
or 88.5 in/lb of torque (Fig. 6.23).
9. Replace both top upholstery bolts. Ensure the bolts
thread through the top upholstery eyelets, (Fig. 6.24).
10. Retighten the upholstery straps (Fig. 6.26).
11. Reattach the upholstery cover (Fig. 6.27).
Fig. 6.21
Fig. 6.22
Fig. 6.23
Fig. 6.24
Fig. 6.25
Fig. 6.27