Model: Zippie Salsa (RWD)
max. load (Mass of the test
dummy): 75 kg
The wheelchair Zippie Salsa
conforms to the following
standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and control systems
for electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in accordance
with ISO 7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified as
a Class B power chair
f) all materials used on this
product conform to EN1021
parts 1 and 2.
ISO 7176-15 Min. Max. Comments
Overall length (with leg rest) 1000 mm 1040 mm 90° hanger
Overall Width 580 mm 610 mm 12” / 14” wheels
Total mass (w. batteries) 114.5 kg 160 kg without Balle/with Balle lift & tilt
Weight of the heaviest individual part - 18,5 kg Heaviest removable part
Static stability - downhill - > 20° 0° tilt/0° recline/40 cm deep & 50 cm seat
height
Static stability uphill - 10.6° 9° tilt/16° recline & 45 cm seat height
Static stability - sidewards - 15.2° 0° tilt/0° recline/40 cm deep & 50 cm seat
height
Energy consumption (max. range) - 32 6 kph motor and 100 kg user (ISO7176-4)
Dynamic stability uphill - 8 ° 9° tilt/16° recline &max. seat height (not
with balle)
Obstacle climbing (with kerb climber) 85 mm 100 mm
Max. Speed forward 6 kph 10 kph 6 kph motor & 12.5” wheels/ 10 kph mo-
tor & 14” wheels
Min. Braking distance from maximum
speed
- - Dependant on programming
Seat plane angle 0° 9° mechanical, 3° increments
Effective seat depth 302 mm 402 mm 20 mm increments
Effective seat width 302 mm 402 mm 20 mm increments
Seat height at the front edge 375 mm 520 mm 12” wheels / 385 mm 14” wheels
Backrest angle -4° 16° mechanical, 4° increments
Back height 385 mm 435 mm 25 mm increments
Footrest to seat distance 165 mm 360 mm
Leg to seat surface angle 110° -
Armrest to seat distance 150 mm 225 mm
Front position of the armrests 240 mm 315 mm
Min. turning radius 850 mm 910 mm 70° Hanger
Nominal battery voltage 24 V -
Battery cut-off voltage 16 V -
Battery fusible links - - 150A in line fuse on each battery
Quickie Direct Actuator Control Box
fusible link
- - 15A AST Mini Blade
Mass of the test dummy - 75 kg
EN 12184 Min. Max. Comments
Max. kerb height 85 mm 100 mm with kerb climber
Ground clearance 70 mm 80 mm 12” / 14”
Turning space 1200 mm -
Speed control operation force - 2 N
Direction control operation force - 1 N
13.0 Specification sheets (EN 12184 & ISO 7176-15)
Manufacturers (Europe):
Sunrise Medical GmbH+Co.KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Deutschland
To Next Page
Loading...
