Zippie Salsa - Manual Setting of the Seat Angle

ZIPPIE SALSA & SALSA 35
6.11 Manual setting of the seat angle on the SALSA
To set the seat angle, release the bolt fixing the “Banana”
bracket between the seat interface module and the seat
packer module. Set the seat angle at 0°, 3° or 6° and
9°, then replace and re tighten the bolt between the seat
interface module and the seat packer module. (Fig. 6.28).
.
6°
9°
0°
3°
Fig. 6.28