CAUTION!
Once the back is fully reclined/forward, or the lift is fully
raised/lowered, or the seat is fully tilted backwards/
forwards, do not continue to hold the joystick in its operating
position as this could damage the actuator.
R-net Control
Please refer to your R-net Owner’s Manual for
details.
QUICKIE DIRECT ACTUATOR CONTROL BOX
(Fig. 6.33)
To operate the backrest, seat lift, seat tilt:
• Push the relevant toggle switch into the forward
position.
• Releasethetoggleswitchwhenthedesiredbackrest
angle, seat lift height or seat tilt angle is reached.
CAUTION!
Once the back is fully reclined/forward, or the lift is fully
raised/lowered, or the seat is fully tilted backwards/
forwards, do not continue to hold the switch in its operating
position as this could damage the actuator.
R-net Control
Please refer to your R-net Owner’s Manual for
details.
Fig. 6.33
Fig. 6.32
• Operatethejoystickintheforwardorrearwarddirection
to move the recline up or down.
• Release the Joystick when the desired angle is
reached.
• To return to drive mode, press the actuator button
again.