Acknowledgements
Thank you for purchasing our product. Before using this machine,
please read this manual carefully.
Notice
Please Do not place the product in the place with strong light, because
the strong light may significantly affect the fingerprint scanning, and
thus cause the fingerprint verification fail. This product is designed for
indoor installation, if it has to be installed it outdoor, please place the
equipment in proper environment. You must beware of not exposing it to
wet or harsh state, the product work temperature rang is 0-40℃. Do not
use your machine exceeding this range, keep your equipment away from
the heat source and radiator. For long time use it outdoor and the internal
heat of the machine, will cause problem to the operation.
Please keep it away from violent collision, which would cause the
internal components loosened or damaged. And the equipment is not a
waterproof; Do not place this equipment in wet or damp.
Please use the equipment as the notice, you will get good effect and test
speed.
Notice： Fingerprint Enrollment and Identification shall be taken
after the installation the fingerprint identification machine
To Next Page
Loading...