Installation Enrollment Identification
Enrollment Installation Identification
How to place the finger
Make sure the fingerprint image captured is of a core of presented
finger, a fingerprint is point to locate within innermost recurring
ridge of any give finger.
To obtain a higher success rate, enroll same finger 3 times in a
slightly-adjusted angle, one to the center, one incline slightly to the
left. The third incline slightly to the right. Please follow the place
procedure; the success rate will increase dramatically.
The correct way is:
Place a finger flatware on the sensor surface
Place it to the center of the sensor surface
The wrong way is
To Next Page
Loading...