press accords with the display on the screen. The key you press
display in garnet color, otherwise the key in gray black.
Press “OK”、“ESC”（F8） key to exit from this test
3.6.4 Test fingerprint Sensor
The auto-test fingerprint sensor tells user whether the sensor is in
normal, through the test you can examine the picture resolution of
the fingerprint, to whether the fingerprint picture is clear, and the
screen will real-time show fingerprint picture that is captured from
the finger while you are placing the fingerprint sensor window.
Press “OK”、“ESC”（F8） key to exit from this test.
3.6.5 Real-time clocks
The equipment provides function to test the clock, through
stopwatch test you will get result that whether the clock is in
normal operation or not.
Press the /“OK” key to start to time, press the /“OK”
key again to stop it, to check whether the equipment time is in
accuracy. Press “OK”、“ESC”（F8） key to exit from this test.
To Next Page
Loading...