set the following several items:
IP address: default IP is 192.168.1.201, which has to be resetted.
Subnet mask: default Subnet mask is 255.255.255.0, you may change
it depending on actual application.
Gateway: the default gateway is 0.0.0.0, you may change it
depending on actual application
Network speed: In network running speed, there are Automatic
Adaptation, 10M and 100M, three options;
Connection password: in the Connection Setting. May change
communication parameter, after setting, input the corresponding value
on connection interface in the PC software.
RS232 way
Machine setting: Enter the menu - communication option, please set
the following several items:
Baud rate: With the computer communication speed, the high speed
communication is quick, it is better to use the RS232 communication;
(115,200, 57,600).
RS232: Whether uses the RS232 communication, set this item as
“Yes”
Communication password: in the “connection setting". May change
communication parameter, after setting, must input the
corresponding value on connection interface in the PC
RS485 way
Machine Setting: Enter the Menu – Communication option, please
set the following items:
Serial number: Assign a network ID. The serial number scope is 1
To Next Page
Loading...