D3 Series User Manual
Page | 41 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
10 Advanced Settings
Communication Settings 10.1
Click COMM. on the WebServer.
Change the IP address of the device as needed, click Confirm to save, and the device will automatically
synchronize the IP information.
Function Name Description
DHCP
Select whether to obtain the IP Address by automatically.
IP Address
The default IP address is 192.168.1.201. It can be modified according to network
availability.
Subnet Mask
The default Subnet Mask is 255.255.255.0. It can be modified according to
network availability.
Gateway
The Default Gateway address is 0.0.0.0. It can be modified according to network
availability.
DNS
The default DNS address is 0.0.0.0. It can be modified according to network
availability.
Note: After the IP address of the device is changed successfully, you need to log out of the currently
WebServer and log in again to the IP address you just changed to connect to the device. For WebServer
login details, please refer to Login WebServer.
To Next Page
Loading...
Need help?
General
