D3 Series User Manual
Page | 46 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Face 10.6
Click Face on the WebServer.
Function Name Description
1:N Threshold Value
Under face verification mode, the verification will only be successful when the
similarity between the acquired facial image and all registered facial templates
is greater than the set value.
The valid value ranges from 0 to 100. The higher the thresholds, the lower the
misjudgment rate, the higher the rejection rate, and vice versa. It is
recommended to set the default value of 51.
To Next Page
Loading...
Need help?
General
