D3 Series User Manual
Page | 36 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Rights
Set the role for the user as either Normal User or Super Admin.
Super Admin: The Super Admin owns all management privileges in the
WebServer.
Normal User: If the Super Admin is already registered in the WebServer,
then the Normal Users will not have the privileges to manage the system
and can only access authentication verifications.
Password
Set the user's registration password.
Card Number
Enter the card number manually, after registering the user's card number, the
user can swipe the card for verification. Or behind the card number, click
Register, and the device will display the card registration interface in real time,
swipe the card underneath the card reading area. The registration of the card
will be successful.
Note:
1. During the initial registration, you can modify your ID; you cannot be modifying the registered ID
once after the successful registration.
2. If the message "Registration failed!" pops up, you must choose a different User ID because the one
you entered already exists.
9.1.2 Online Registration
In this interface, you can register the User’s Face and Fingerprint. The verification mode can only be
registered after the basic information is confirmed.
Register Fingerprint
In the current interface, behind the fingerprint bar, click Register, and the device will display the
fingerprint registration interface in real time, press your finger onto the fingerprint sensor of the device,
and follow the instructions to complete the registration.
To Next Page
Loading...
Need help?
General
