D3 Series User Manual
Page | 42 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Cloud Server Setting 10.2
Click Cloud Service Setup on the WebServer.
Function Name Description
Enable
Domain
Name
Server Address
Once this function is enabled, the domain name mode “http://...”
will be used, such as http://www.XYZ.com, while “XYZ” denotes the
domain name (when this mode is turned ON).
Note: The device is blocked from enabling this feature.
Cloud Server Address
The address of the Zlink server.
Cloud Service Port
The port of the Zlink server.
Proxy Server Setup
When you choose to enable the proxy, you need to set the IP
address and port number of the proxy server.
Note: The device is blocked from enabling this feature.
Wi-Fi Settings 10.3
The device provides a Wi-Fi module, which can be built-in within the device module or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can toggle
the Wi-Fi to disable the button.
Click Wi-Fi Settings on the WebServer.
To Next Page
Loading...
Need help?
General
