D3 Series User Manual
Page | 43 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Click Connect to Wi-Fi after the name of the searched wireless network, and enter the correct password in the
pop-up window to connect to the network.
Function Name Description
WIFI
Wi-Fi's switch, choose button to enable/disable the Wi-Fi
function. Click to refresh the wireless network.
Wi-Fi Name
Show the currently connected Wi-Fi.
Connection Status
Displays the current connection status of the device's wireless
network.
IP Address
Displays the IP address of the current device's wireless network.
The Wi-Fi can also be added manually if the required Wi-Fi does not show on the list.
To Next Page
Loading...
Need help?
General
