ZKTeco F18 User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 11 -
Step 3: If the card has not registered yet, prompt that card is not registered.
1.4 Connection with PC
The device only records attendance time. The statement can be disposed
by software on PC. Therefore, it is necessary for device to connect PC to
download attendance record to attendance software.
The following is some connection methods:
 Ethernet:
（1) Through hub: Use parallel net cable (to connect network card and
hub) to connect device into the network.
（2) Direct connection: use cross net cable（connect two Ethernet
terminals directly) to connect device and PC.
Set device: Enter Menu－Communication option－Network to set the
following items:
IP address: Default IP as 192.168.1.201.You can modify it if it is
necessary.

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm