ZKTeco F18 User Manual

F18 User Manual V1.0
- 60 -
 Notice:
"4.4.3 Picture cycle interval" an
d
"4.4.4 Clock display delay"
functions are fit use common
mode of interface style only.
When you select matrix or magic
mode, these functions are
invalid. Display screen show the
matrix or magic style all the
hil
interface success, machine displayed: "Standby Interface modified success".
T
hen you should restart the device.
Common-Style
Matrix-Style Magic-Style
4.5 Reset
Make device’s communication option, system option and so on reset to
the state of factory.
Factory reset: Make all the parameters in the device reset to the state of
factory.
Reset keyboard definition: Reset the corresponding setting of

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm