Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 81 -
The picture’s resolution is 320 wide and 240 high. It is better not to be
more or less than it.
The propaganda pictures’ count should be 10 at most.
If you want it, please contact our businessman or technician.
10.5 Card support (ID/EM, MIFARE Card) ★
In order to meet security market need, our fingerprint biometric
verification reader can be embedded EM, MIFARE reader module.
ID/EM Card
The FRT supports ID cards with working frequency of 125KHz and
card reading distance of 2m to 5m.
Mifare Card
The FRT supports MIFARE non-contact smart cards with working
frequency of 13.56 MHz and card reading distance of 3m to 5m.
Using 125MHZ, 13.56 MHz non-contact smart card technology, these
fingerprint products provide users with new options for supporting
multi-authentication of identity. Combine a non-contact card presentation with a
fingerprint biometric. Or, use a personal identification number (PIN) number
along with a non-contact card presentation. (See multi-authentication).
The fingerprint products provide three levels of fingerprint verification.
During the enrollment process, the LCD prompt will guide the user to place
their finger on the sensor. The fingerprint template is collected at the unit
and immediately transferred to the card. During this enrollment process, the
fingerprint template is stored on the card or the fingerprint machine.
During verification at the door, the LCD graphical display will assist the
user with instructions about finger placement on the biometric sensor.
For more detail see ID/EM, Mifare Card user Guide.