ZKTeco F18 User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 57 -
data for how to upload the propaganda pictures.)
Operation:
Press “▲/▼” to preview the propaganda pictures in the device. Click
OK to delete all these pictures. After deletion, the next picture will
appear. Click “delete all” to delete all the propaganda pictures in the
device. Then press “ESC” to return to data management interface.
4.3 Upgrade firmware
Update the firmware by utilizing the USB Pen Drive (flash drive)
 Notice: If you need such upgrade file, please contact technician.
Usually, firmware upgrade is not recommended.
Operation:
Insert U disk with upgrade file into the slot. The device will identify the
file automatically. The device will give prompt whether it is successful
or not.

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm